In Wall Ironing Board IronAWay E-42
Our metal ventilated board
differentiates itself from the earlier wooden ironing boards. The traditional
built-in wooden board only needed to be hard for the dry irons of the day.
Today�s advanced steam irons are designed to project bursts of steam to penetrate
deep into the fabric. This allows for removing wrinkles with less effort. Yet,
using them on a wooden ironing board caused a build-up of condensation on the
board and hot spots when ironing. Our metal ventilated board allows steam to
pass through the fabric keeping the surface dryer and providing a more
even-heated ironing surface.
Key Features:
- 42" Ventilated Board
- 60 Minute Motor Timer
- Electrical System
- Storage Shelf
- Full Length Piano Hinge
- Ironing Board Cover & Pad
- UL Listed
- Garment Bar
- Spotlight/Less Bulb
- Unfinished Flush Wood Door (Maple Veneer Unfinished)
- Built-In Safety Switch
- Fully assembled and ready to install
- Outside Dimensions15� x 52� x 7 ��
- Rough-In Opening Size14 3/8� x 51 1/4� x 3 7/8�
Not only is it convenient to store
your iron inside the unit, but the location keeps the iron out of children�s
reach. There�s no reason to let your iron cool down, the insulated heat shield
allows for immediate shelving. The hot iron storage area has been designed to
accept the majority of steam/dry irons available at retail, including many
premium models.
No reason to worry if you�re
temporarily called away or unable to continue your ironing!The silent motor
timer offers safety and convenience. Just set the dial to the desired time. The
On/Off indicator will let you know the power is on. Power shuts off automatically
once the time has expired. If you�re called away, just place your hot iron into
the hot iron storage and lift the board into the upright position, the
electrical safety switch disconnects power instantly. This feature is standard
on all models numbers containing an "E" which defines "Electrical".
Storage is not a problem with our
ironing centers! All models will include an additional storage shelf, our
60" wood cabinets include two storage shelves. Keep all your ironing aids
in one handy location!
The garment bar is helpful when you
have more than just a few garments to iron. The garment bar can hold multiple
clothes hangers, making it more convenient to perform continuous ironing. This
feature is standard on all other models except the IAW-42.
Do you want to create an environment
that provides optimal surroundings when ironing out all the wrinkles? When
ironing garments in insufficiently lighted areas, our spotlight will enhance
your ability to iron out those sometimes not found hard to spot creases and
crevices. This feature is standard on all models numbers containing an "E"
which defines "Electrical".
All Centers come with a cover and
pad, that laces underneath the board, it is the most secure in the industry
This fits any 42" or 46" board, as it has a draw string to tighten it
to the size of the board.
All centers come with a piano hinge
full length, you will never have any issues with bending or warping, this is
built to last
Models come standard with a flat maple veneer door. All wood doors come
unfinished and can be stained or painted to match your decor. White doors do
not require finishing. Mirror is full length, 1/4" plated glass with
polished edge. Mirrored door is shipped separate for added protection. No door
option is available to match your cabinetry. Keep in mind the door hardware is
not included when ordering a "No Door." This consists of the Piano
Hinge, Roller Catch Assembly, and Garment Bar. If you would like a "Door
Hardware Kit," add them by choosing this option within the Optional
Features section.
The Maytag Smart Fill - M800 is a trendy iron and steamer in one. The
innovative removable water tank allows you to fill it while the iron is
heating. Heating takes less than one minute with the new speed heat technology.
The iron�s innovative controls for water spray and steam surge provides
dramatic results. The stainless steel sole plate enables the smoothest glide
and the 360 degree tangle free cord offers the ultimate freedom of motion. This
iron�s quality, design, and function will compliment your IRON-A-WAY ironing
center.
The sleeveboard is placed on top of the main board and used when you want to
iron sleeves or smaller garments that won't fit over the nose of your regular
ironing board. When in use, the sleeveboard rests on top of the main ironing
board, nothing holds it in place. Please note, when not in use the sleeveboard
is not stored inside the unit, it must be stored in another location than
inside the unit itself.
The kit is necessary if planning to surface mount rather than installing in
between studs
Surface Mount Kit finishes out back sides of unit for flush finish
Wood pieces can be stained or painted to match cabinet
Unit will protrude approximate 7� to 8� rather than 3� � 4� depending on which
model purchased
In Wall Ironing Board Model E-42
Specification Sheet
Overall height: 52
�
Overall width: 15
�
Overa
ll depth including door: 7 3/4
�
Di
mension from wall to outer
E
dge of door (when recessed): 3
7/8
�
Penetration into opening: 3 7/8�
Rough
opening height: 51 1/4
�
Rough
opening width: 14
3/8
�
Wall opening depth: 3 7/8�